Hawker Dayton Corporation Dowel Machines

Machines


Model 500 Dowel Machine Stock diameter: 5/16"- 1 1/2" Machine shown without guard for illustration only. Guard must be in place before operating.		CFD-60 Round Rod Turning Machine


Model 1500 Dowel Machine Stock diameter: 5/16"- 2" Machine shown without guard for illustration only. Guard must be in place before operating.		CFD-80 Round or Square Rod Turning Machine


Model 2000 Dowel Machine Stock diameter: 1/2"- 2" Machine shown without guard for illustration only. Guard must be in place before operating.		CF-100A2 High Productivity Round Rod Moulder


Models 3000 & 4000 Dowel Machine 3000 Stock diameter: 1- 3/4" 4000 Stock diameter 1 3/4"-4 Machine shown without guard for illustration only. Guard must be in place before operating.		CF-18 Dowell Milling Machine


Models 5000 & 6000 Dowel Machines 5000 Stock diameter: 2-1/2" - 5" 6000 Stock diameter: 4" - 6" Machine shown without guard for illustration only. Guard must be in place before operating.		CF-36 Dowell Cross-Cut and Chamfering Machine


300-DB Saves maintenance Simplified Design; all parts easily accessible. Saves Labor 2-stage operation produces finished job with one handling Protects Finishes Non-marring white rubber feed rolls guard against damage.		CFS-80B2 Double Belt Round Rod Sanding Machine



300-S 1 to 6 Sanding Heads Feed Speeds Up to 18 F.P.M. Sands straight Tapered Round Bellys Metal Wood		CFS-80 Single Belt Round Rod Sanding Machine


Bignell M-57 Hand Feed Chucking Machine 3 HP 1755 RPM Motor 220-440 Volt 3 Phase 60 Cycle 1-1/8 - 7 Threaded Spindle With "V" Saddle (Stock Guide) Variations available as specials.


Bignell M-57 Chucking Machine with A-68 Sliding Table Work Holder with Air Clamp 3 HP 1755 or 3600 Motor 220-440 Volt 3 Phase 60 HZ Manual or Magnetic Starter & Guard 1-1/8 - 7 Threaded Spindle Guard removed for illustration. Manual Clamp also available.


Bignell M-70 Threading & Tapping Machine